# Parallels Desktop软件使用

---

在Mac系统中，将Parallels Desktop 安装好后，在终端中可以通过ifconfig 命令来查询电脑中的所有网卡基本信息。

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384

​	options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>

​	inet 127.0.0.1 netmask 0xff000000 

​	inet6 ::1 prefixlen 128 

​	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 

​	nd6 options=201<PERFORMNUD,DAD>

XHC20: flags=0<> mtu 0

gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280

stf0: flags=0<> mtu 1280

en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500

​	options=40b<RXCSUM,TXCSUM,VLAN_HWTAGGING,CHANNEL_IO>

​	ether 88:88:88:88:87:88 

​	inet6 fe80::1486:3387:81b2:c05e%en0 prefixlen 64 secured scopeid 0x5 

​	inet 192.168.8.153 netmask 0xffffff00 broadcast 192.168.8.255

​	nd6 options=201<PERFORMNUD,DAD>

​	media: autoselect (1000baseT <full-duplex,flow-control,energy-efficient-ethernet>)

​	status: active

en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500

​	options=400<CHANNEL_IO>

​	ether 30:52:cb:82:fe:43 

​	inet6 fe80::8fc:da05:e065:4b8a%en2 prefixlen 64 secured scopeid 0x6 

​	inet 192.168.31.153 netmask 0xffffff00 broadcast 192.168.31.255

​	inet6 2408:825c:6a2:889c:182b:de84:a8c4:e7b6 prefixlen 64 autoconf secured 

​	inet6 2408:825c:6a2:889c:9070:ee8b:988c:5fdc prefixlen 64 autoconf temporary 

​	inet6 2408:825c:6a2:889c::226 prefixlen 64 dynamic 

​	nd6 options=201<PERFORMNUD,DAD>

​	media: autoselect

​	status: active

p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304

​	options=400<CHANNEL_IO>

​	ether 02:52:cb:82:fe:43 

​	media: autoselect

​	status: inactive

awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1484

​	options=400<CHANNEL_IO>

​	ether fe:e3:9f:09:cd:1c 

​	inet6 fe80::fce3:9fff:fe09:cd1c%awdl0 prefixlen 64 scopeid 0x8 

​	nd6 options=201<PERFORMNUD,DAD>

​	media: autoselect

​	status: active

llw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500

​	options=400<CHANNEL_IO>

​	ether fe:e3:9f:09:cd:1c 

​	inet6 fe80::fce3:9fff:fe09:cd1c%llw0 prefixlen 64 scopeid 0x9 

​	nd6 options=201<PERFORMNUD,DAD>

​	media: autoselect

​	status: active

utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380

​	inet6 fe80::754d:ca98:488d:bcc6%utun0 prefixlen 64 scopeid 0xa 

​	nd6 options=201<PERFORMNUD,DAD>

utun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000

​	inet6 fe80::eb0e:61d8:4a9a:5d45%utun1 prefixlen 64 scopeid 0xb 

​	nd6 options=201<PERFORMNUD,DAD>

vnic1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500

​	options=3<RXCSUM,TXCSUM>

​	ether 00:1c:42:00:00:09 

​	inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255

​	media: autoselect

​	status: active

vnic0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500

​	options=3<RXCSUM,TXCSUM>

​	ether 00:1c:42:00:00:08 

​	inet 10.211.55.2 netmask 0xffffff00 broadcast 10.211.55.255

​	media: autoselect

​	status: active

以上是我的电脑（Mac）的网卡基本信息。

## 网路模式：

共享模式（网卡：vnic1）

shared network ，该模式是PD推荐（默认）的方式，相当于PD软件单独为虚拟机创建了子网，通过Mac的网卡连接互联网，但是在Mac中不可见。实际上，该模式相当于Vmvare中的NAT模式。

可以在软件的设置中，将网卡的信息显示到系统设置中。

操作：

偏好设置--->网络--->网络模式--->在系统偏好设置中显示

将其勾选☑️，即可。

Host—Only 模式（网卡：vnic0）

同理，该模式一样。有共享模式需求的话 可以按照共享模式的设置进行设置。

桥接模式（物理网卡：en0、en1)